DHCP address pool not found

Unanswered Question
Dec 4th, 2007
User Badges:

I have configured several DHCP pools from a class C address and created associated interfaces on a 3560G switch. Here is a breakdown...


interface Vlan5

ip address 192.168.60.1 255.255.255.224

!

interface Vlan7

ip address 192.168.60.65 255.255.255.192

!

interface Vlan9

ip address 192.168.60.129 255.255.255.192


ip dhcp pool scanners

network 192.168.60.64 255.255.255.192

default-router 192.168.60.65

domain-name ipd.mli.corp

netbios-node-type h-node

dns-server 192.168.61.10 172.17.7.11

!

ip dhcp pool wireless

network 198.168.60.128 255.255.255.192

default-router 192.168.60.129

domain-name ipd.mli.corp

netbios-node-type h-node

dns-server 192.168.61.10 172.17.7.11

lease 8


When a device tries pull from VLAN 9, I receive the following through a debug DHCP events...


there is no address pool for 192.168.60.129.


I cannot find a single reason why this is not working. Any ideas???


Brent

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Tue, 12/04/2007 - 19:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Brent


What you have posted looks ok. Would you post the complete config of the 3560? Perhaps there is something in the config that will help to explain this.


HTH


Rick

bberry Wed, 12/05/2007 - 09:58
User Badges:

Could there be any quirky issues with DHCP? Using VLAN 7 (scanners pool) works perfectly fine. But I am unable the get vlan 9 (wireless pool) working. I still receive the message that there is no address pool for 192.168.60.129.


I am going to test setting up a new VLAN with complete different space but the same subnet and see what happens. i.e. copy the 192.168.60.128 network configuration but use say 192.168.62.128.

Actions

This Discussion