×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

LX gbic fails to come up

Unanswered Question
Dec 5th, 2007
User Badges:

Hi,


We have a 3750 connecting over a single mode fibre using Cisco LX GBICs into a 6506-E. The link comes up connecting into a 3560 switch, but not when it connect into the chassis.


does any one know what the following means -


#sh idprom int g1/14

Vendor Name : CISCO-FINISAR

Vendor OUI : 0x0 0x90 0x65

Vendor PN : 1000BASE-LX


Extended ID Fields

Options : Loss of Signal implemented TX_FAULT signal implemented TX_D

ISABLE is implemented and disables the serial output

Vendor SN : H11L287


Thanks,

James


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion