Logo IP telephone

Answered Question
Dec 5th, 2007

How I can change the Cisco logo, in the call manager express 4.2?

I have this problem too.
0 votes
Correct Answer by rob.huffman about 9 years 1 month ago

Hi Ricardo,

Sorry about that :) Maybe this will be more helpful.

CallManager Express: Create a Customized Background Image for the 7970 IP Phone

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_tech_note09186a008062495a.shtml

Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
rob.huffman Wed, 12/05/2007 - 06:00

Hi Ricardo,

Have you looked into using this CME Feature?

System Message Display

The System Message Display feature allows you to specify a custom text or display message to appear in the lower part of the display window on display-capable IP phones. If you do not set a custom text or display message, the default message "Cisco Unified CME" is displayed.

When you specify a text message, the number of characters that can be displayed is not fixed because IP phones typically use a proportional (as opposed to fixed-width) font. There is room for approximately 30 alphanumeric characters.

The display message is refreshed with a new message after one of the following events occurs:

Busy phone goes back on-hook.

Idle phone receives a keepalive message.

Phone is restarted.

The file-display feature allows you to specify a file to display on display-capable IP phones when they are not in use. You can use this feature to provide the phone display with a system message that is refreshed at configurable intervals, similar to the way that the text message feature provides a message.

The difference between the two is that the system text message feature displays a single line of text at the bottom of the phone display, whereas the ***system display message feature can use the entire display area and contain graphic images.

SCCP: Modifying System Message Display

To modify the system message display on phone screen, perform the following steps.

SUMMARY STEPS

1. enable

2. configure terminal

3. telephony-service

4. system message text-message

5. url idle url idle-timeout seconds

6. end

System File Display: Example

The following example specifies that a file called logo.htm should be displayed on IP phones when they are not in use:

telephony-service

url idle http://www.abcwrecking.com/public/logo.htm idle-timeout 35

From this good CME doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1032353

Hope this helps!

Rob

ricardorojas123 Wed, 12/05/2007 - 07:34

Rob, I need add a picture in the Background Images, from the User Preference/Cack ground Images menu.

omgjames1 Sun, 08/18/2013 - 06:39

How do you do this for Call Manager 8.6.1?

Sent from Cisco Technical Support iPad App

Paolo Bevilacqua Sun, 08/18/2013 - 09:03

omgjames1 wrote:

How do you do this for Call Manager 8.6.1?

Sent from Cisco Technical Support iPad App

You are responding to a 6 years old thread. Please search the forum and documentation before asking.

Actions

This Discussion