12-05-2007 04:47 AM - edited 03-13-2019 04:46 PM
How I can change the Cisco logo, in the call manager express 4.2?
Solved! Go to Solution.
12-05-2007 10:22 AM
Hi Ricardo,
Sorry about that :) Maybe this will be more helpful.
CallManager Express: Create a Customized Background Image for the 7970 IP Phone
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_tech_note09186a008062495a.shtml
Hope this helps!
Rob
12-05-2007 06:00 AM
Hi Ricardo,
Have you looked into using this CME Feature?
System Message Display
The System Message Display feature allows you to specify a custom text or display message to appear in the lower part of the display window on display-capable IP phones. If you do not set a custom text or display message, the default message "Cisco Unified CME" is displayed.
When you specify a text message, the number of characters that can be displayed is not fixed because IP phones typically use a proportional (as opposed to fixed-width) font. There is room for approximately 30 alphanumeric characters.
The display message is refreshed with a new message after one of the following events occurs:
Busy phone goes back on-hook.
Idle phone receives a keepalive message.
Phone is restarted.
The file-display feature allows you to specify a file to display on display-capable IP phones when they are not in use. You can use this feature to provide the phone display with a system message that is refreshed at configurable intervals, similar to the way that the text message feature provides a message.
The difference between the two is that the system text message feature displays a single line of text at the bottom of the phone display, whereas the ***system display message feature can use the entire display area and contain graphic images.
SCCP: Modifying System Message Display
To modify the system message display on phone screen, perform the following steps.
SUMMARY STEPS
1. enable
2. configure terminal
3. telephony-service
4. system message text-message
5. url idle url idle-timeout seconds
6. end
System File Display: Example
The following example specifies that a file called logo.htm should be displayed on IP phones when they are not in use:
telephony-service
url idle http://www.abcwrecking.com/public/logo.htm idle-timeout 35
From this good CME doc;
Hope this helps!
Rob
12-05-2007 07:34 AM
Rob, I need add a picture in the Background Images, from the User Preference/Cack ground Images menu.
12-05-2007 10:22 AM
Hi Ricardo,
Sorry about that :) Maybe this will be more helpful.
CallManager Express: Create a Customized Background Image for the 7970 IP Phone
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_tech_note09186a008062495a.shtml
Hope this helps!
Rob
12-05-2007 10:53 AM
;) Thank !!!!!
I will configure
08-18-2013 06:39 AM
How do you do this for Call Manager 8.6.1?
Sent from Cisco Technical Support iPad App
08-18-2013 09:03 AM
omgjames1 wrote:
How do you do this for Call Manager 8.6.1?
Sent from Cisco Technical Support iPad App
You are responding to a 6 years old thread. Please search the forum and documentation before asking.
08-19-2013 05:46 AM
James,
Just download the List.xml file via the CLI and make the changes as you need.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: