12-05-2007 05:32 AM - edited 07-03-2021 03:03 PM
Hi, I have an 877w configured in VPN mode to my HQ. All works fine. Now I would like to give this remote site wireless access via this 877w. Is there an example config anywhere as i just want to create an SSID and perhaps WPA-PSK authentication?
What I would love to do is authenticate users via a windows RADIUS server at the HQ.
Let me know if you wan the config attached.
12-12-2007 07:17 AM
WPA-PSK configuration is supported on 877w. Here is a sample configuration on CLI
int dot0
encryption mode ciphers tkip
ssid
authentication open
authentication key-management wpa
wpa-psk ascii
12-12-2007 08:03 AM
Thanks, I have added that and can see it, but don't get a DHCP address, how do I auto assign a DHCP address to the wireless users?
12-12-2007 02:00 PM
Nat the scope you have assigned to the Vlan or network.
12-12-2007 10:55 PM
Hi, I'm not sure I understand, do you have an example? I have added the above example and my laptop sees the wireless network when I search, I put in the pre-shared key and authentcate, but it fails on assigning and IP.
I have a lan dhcp scope and a VLAN 1 which is my local router IP.
Let me know if you want the config uploaded.
01-19-2008 07:37 PM
You must briging the Dot11Radio0 and Fe0.
Then let you lan dhcp server to assign IP adress.
Config example:
bridge-group 1
interface Dot11Radio0
bridge-group 1
int Fe0
bridge-group 1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide