configure voice register dn and pool with the mac address and codec g711u. Configure voice register global. Configure the linksys accordingly. That's all what is required.
any firmware on the linksys should be OK. Just enter configuration on the phone via web interface, assign the number and the IP address of the CME for registrar and proxy.
Can you guys post an example configuration of this type of integration?
I have an issue with the same scenario, CME 4.2 and Linksys Phone SPA922. I can make PSTN calls, but I cannot make internal calls between SPA922 phones.
Likely the phones are not registered. Do "show sip-ua status registrar" to confirm.
To make phone register, assign user ID same as number, and password.
Getting Started
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
