12-05-2007 10:28 AM - edited 03-15-2019 07:37 AM
I have looked for a way to disable Web Access to a lot of phones with CM 4.1, but can't seem to find a way to do it with Device Pool, Enterprise Params, Service Params, or BAT.
Any way to do it?
Solved! Go to Solution.
12-05-2007 11:22 AM
This can be accomplished with the BAT tool. I just did it in my lab. You select update phones, using a query, then a model type (i did 7940), and an option on the bottom right of step two is Web Access.
Check the box, and set the drop down to the desired value.
keep in mind that this will do ALL phones of that model, and could be VERY system intensive.
I'm using CCM 4.1(3) with BAT 5.1(4a)
hope that helps.
12-05-2007 10:58 AM
I am not really sure, but can this be acheived with Mutli Level Administration (MLA)?
12-05-2007 11:22 AM
This can be accomplished with the BAT tool. I just did it in my lab. You select update phones, using a query, then a model type (i did 7940), and an option on the bottom right of step two is Web Access.
Check the box, and set the drop down to the desired value.
keep in mind that this will do ALL phones of that model, and could be VERY system intensive.
I'm using CCM 4.1(3) with BAT 5.1(4a)
hope that helps.
12-05-2007 12:11 PM
That looks like the ticket. Thx.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: