Find below the configuration script for the adsl HUAWEI route got from local isp.
cpu-usage cycle 1min
DNS server 22.214.171.124
DNS server 126.96.36.199
DNS server 188.8.131.52
web set-package force flash:/http.zip
radius scheme system
async mode flow
ip address 184.108.40.206 255.255.255.248
ip address dhcp-alloc
map bridge Virtual-Ethernet1
map bridge Virtual-Ethernet2
ip address 220.127.116.11 255.255.255.252
FTP server enable
ip route-static 0.0.0.0 0.0.0.0 18.104.22.168 preference 60
snmp-agent local-engineid 000007DB7F0000010000233D
snmp-agent community read cisco
snmp-agent community write cisco
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 22.214.171.124 params securityname cisco v3
snmp-agent trap source Virtual-Ethernet2
user-interface con 0
user-interface aux 0
user-interface vty 0 4
I tried to configure the cisco router 2811 replacing the HUAWEI router with the below config details i usally do for the adsl connection usign SDM GUI.
The PVC 8/35 and encap pppoAMUX and username and password.
But the result is atm up but the virtual-access 2 is down. LCP ReQ some message appear.
Finally the ISP informed us that they setup would not support Cisco routers and adviced the customer go for fixed ip adsl service that support the config i used (PVC,PPPOAMUX). ISP gave the customer managed adsl service that not work with cisco router. I do not believe it and i believe i forget the cmds to configure.
So i came to the Form for your help.
Please advice me how can i support the customer?.
Customer adviced by ISP for the leased line service with fixed IP ADDRESSES.