12-06-2007 04:45 AM
Hi,
I have Cisco 7206VXR VPN concentrator at DC and Cisco 1841 router at my 100 remote offices. I want to establish Hub and spoke ipsec vpn, where my remote office ipsec tunnels will terminate to VPN Concentrator at DC.
I need advise on
1) should i go with static ipsec tunnel configuration at VPN concentrator for each remote office or
2) should i configure the dynamic ipsec tunnels at VPN concentrator to all my remote offices, If i have to configure the dynamic ipsec tunnels at VPN Concentrator, can you share the configuration sample
Help is appreciated.
Thanks
Ravi
12-06-2007 05:14 AM
Hi,
search CCO for "dmvp white paper". All the configurations are in there. recommend you get and HW VPn accelerator also.
Hope this helps, please rate post if it does!
12-07-2007 03:31 AM
HI,
Thanks, i did search for DMVPN but iam finding the info like MGRE over IPSEC, but i just want hub and spoke IPSEC configuration for ios based platform, which iam not finding it.
Thanks
Ravi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide