E1 /T1 Config

Unanswered Question
Dec 6th, 2007
User Badges:

Hai all,

One of my customer is facing the issue in IPLC (Ind to US ) ..india end its E1 ..were Us end is T1 ...Customer dont want to club 2 T1 to give E1 Output at US end ..

Is this setup possible ..if so what shud be the config at both router ..

Thanks in advance


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Thu, 12/06/2007 - 05:48
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


most likely you will have full T1 in the US, and 24 timeslots E1 in India.

controller e1 x/y

channel-group 0 timeslots 1-24

Hope this helps, please rate post if it does!

CSCO10758684 Thu, 12/06/2007 - 21:40
User Badges:


Thanks for the reply.

This is what the config what i did, Even though link is not up


Controller E1 XXX

channel group 0 time slot 1 - 24

framing NO-CRC4

Line code HDB3

Clock source line


Controller T1 XXX

Channel group 0 time slot 1-24

(can you get me what should be the rest of configuration in USA end)


CSCO10758684 Fri, 12/07/2007 - 04:29
User Badges:

Hai All,

Can any one help me regarding this ..

Config (framing NO-CRC4

Line code HDB3

Clock source line ) ...is modem config



This Discussion