12-06-2007 10:41 AM
Hi
Gilles made mention in a couple of posts about a tool on the ACE that can be accessed by enabling the http server and then connecting to the IP address of the ACE module.
Could somebody point me at some documentation relating to it because I can't seem to find anything.
Thanks
Mark
12-06-2007 12:27 PM
CSM2ACE tool is accessible by pointing the browser to management ip address of ACE card.
You need to make sure that you are running http server on ACE and your Management policy allows http access.
Syed
12-07-2007 12:02 AM
Thanks Syed,
Is it documented anywhere? I was looking for a link I could forward on to a customer.
Many thanks
Mark
12-07-2007 12:32 AM
I dont think it is documented in ACE documentaion.
Syed
12-13-2007 08:18 AM
Hi,
Assuming the ACE module and appliance both have the same tool you can find the online user guide here:
http://www.cisco.com/univercd/cc/td/doc/product/webscale/ace_4700/ace_171/cssaceug.htm
HTH
Andrew.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide