maximum 32 AP count in 12.3(8)JEC in 12.3(8)JA there's no restriction

Unanswered Question
Dec 7th, 2007
User Badges:

Hi,


We've sites with 60 ap's and one ap is the wds-ap, when we've running ios 12.3(8)JA witch our ap1200's we've got for instance:

#sh wlccp wds

.....

AP Count: 59 , MN Count: 235

when we're running ios 12.3(8)JEC we're getting an AP count of 32 en the rest get the message in the log "%LEAPCL-3-TIMEOUT: AP Timed out authenticating to the WDS".

Is this made on purpose ??


Greetings,


René

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
jappiah Tue, 01/15/2008 - 09:43
User Badges:

Rene,

We encountered the same issue when we upgraded our APs from 12.3(8)JA to 12.8(8)JEC. The solution to the problem was to configure the WDS AP with the following:


wlccp wds mode wds-only


Anyway, if you have not resolved the issue please try above command. Thanks Jojo.


kre9900 Tue, 01/15/2008 - 10:26
User Badges:

Ok,


Thanks for the reply, we've solved the problem by a change to 12.3(8)JEA3.

In that version there's a maximum of 60.

Strange that there's no documentation written about this by cisco.

Actions

This Discussion