7921 in G.729 one way audio

Unanswered Question
Dec 7th, 2007
User Badges:

Hi guys, I'm find a strange behavior with an IP Phone 7921 in g.729 with callmanager 4.2(1). My setting on CCM is: Preferred G729 Millisecond Packet Size* 60. With this setting a take one way audio conversation only to 7921, other IP Phone work good. When I'm setting to 50ms the call work correctly. Someone know something about this problem? The 7921 doen't support 60ms of speetch per packet?

thx a lot

Franco

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vmoopeung Fri, 12/14/2007 - 08:34
User Badges:
  • Bronze, 100 points or more

Check the access point to see that the transmit power setting matches the transmit power setting on the phone. One-way audio is common when the access point power setting is greater (100mW) than that of the phone (20mW).


http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008047f9b0.html#wp1106778

Telematic Mon, 12/17/2007 - 23:53
User Badges:

Yes but the problem occur only when I use G.729 and 60 msec of speech per packets, and only with 7921..so I think that my problem isn't concern about power setting.

Actions

This Discussion