100% channel from 6 to 11 busy

Unanswered Question
Dec 7th, 2007
User Badges:


I have some AP 1100 and 1200 that shows 100% busy channel from 6 to 11 everytime.

Is there anybody with the same problem?

I tried to disconnect the radio alarms close to AP but there are still interferences.

Any suggests?

Thanks in advance


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Richard Atkin Fri, 12/07/2007 - 05:20
User Badges:
  • Silver, 250 points or more


The only way to be sure of what's happening is to get a Spectrum Analyser.


ericgarnel Fri, 12/07/2007 - 06:31
User Badges:
  • Gold, 750 points or more

As stated before,get a spectrum analyzer. Turn off G and use B only and see if the percentage goes down.

If you do not have access to a real spectrum analyzer and/or one is too expensive, get a WiSpy from http://www.metageek.net/

They are cheap and give a good idea of channel usage, but are not a substitute for a full blown analyzer. To what it looks like:



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode