12-07-2007 07:35 AM
Hi, I'm working with some engineers in the US who are trying to configure an 877 and connect it to a Verizon provided DSL link. Configs supplied from the UK dont work on this unit, has anyone got a basic template they could use for this?
The problem I'm sure is down to the VPI/VCI and encapsulation types, no one seems to be able to state what should be used.
12-09-2007 11:28 PM
Hi Andy, How are you?
I cam across the Verizon DSL VPI/VCI setting a while ago with someone else - the setting should be:
Verizon 0/35
Hope it helps...
Jay
12-17-2007 04:33 AM
Hi Jay,
I'm well, trust you are also. Thanks for the information, the enginner in the US managed to get this working after 2 days of fiddling about, for some reason they were unable to sort out the encapsulation type.
Andy
12-10-2007 04:20 AM
Does the below help, it's running on a c3620 with WIC1-ADSL and latest IOS ?
It's for Verizon DSL East Coast
++++++++++++++++++++++++++++++++++++++++++++++
ip domain name verizon.net
ip name-server 151.203.0.84
ip name-server 151.203.0.85
ip name-server 151.202.0.84
!
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0/0.1 point-to-point
no ip redirects
no ip unreachables
no ip proxy-arp
pvc 0/35
pppoe-client dial-pool-number 1
!
!
interface Dialer1
ip address negotiated previous
ip access-group 101 in
ip access-group 102 out
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip audit IDS in
encapsulation ppp
dialer pool 1
no cdp enable
ppp authentication chap callin
ppp chap hostname vzxxxxxx
ppp chap password 7 xxxxxxxxxxxxxxxx
!
ip nat inside source list 1 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
++++++++++++++++++++++++++++++++++++++++++++++
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: