Client Count on WCS flapping

Unanswered Question
Dec 10th, 2007
User Badges:

Hi All,

Our WCS has been deployed and running for more than a year. Recently we have added more controllers (4 X 4404) to be monitored by the WCS. The WCS is running on RHEL 4 update 1. The WLCs are running 4.1.185. We noticed on the Network Summary page of WCS where the client graph is, the graph is showing flaps of the client count on intervals of 15-20 mins. At one point we can see the graph showing 600 clients,then the graph will dip all the way to 0 within 15 mins and it will rise again. On further investigation, all client count reports on all individual controllers (9 controllers) revealed flapping client count. We checked the network infra for problematic links but no fault was discovered at the network layer. FYI, we also have a WLA ver

Can anyone help?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gmarogi Mon, 12/17/2007 - 06:21
User Badges:
  • Bronze, 100 points or more

Is the client flapping occuring at any regular intervals or is it occuring because of any specific external events??

Also, post the logs from the controller as well as from the WCS during this client count flapping.

alvin1976 Mon, 12/17/2007 - 11:28
User Badges:

Hi, the client flapping is occurring at regular interval. How do I capture the logs from WCS? from what i remember, i need to download a lot of log files from the WCS. Is that right?

sethgarnar Wed, 12/19/2007 - 06:40
User Badges:

Upgrade the WCS & Location server to the latest releases. I had this same issue when running WCS 4.2 with a old Location release.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode