12-10-2007 01:16 AM - edited 03-03-2019 07:51 PM
My 1761 router gets reboot while testing an ISDN line. I am using IOS, "flash:c1700-advsecurityk9-mz.124-1c.bin"
Pls. suggest the possible solutions.
12-10-2007 01:55 AM
Hi Pandya ,
Can you paste the "show-tech" output of the router.
If possible steps which you are following to test the isdn line.
and "show isdn active " & "show isdn history".
What was the status of ISDN call once the router was booted..
Thanks,
satish
Thanks,
12-10-2007 05:04 AM
The show version is pretty normal and shows that the router started from a power on. If the router is rebooting when you test ISDN it would be helpful to get a show version after that reboot since it is likely to contain helpful information about the cause of the reboot.
I will also note that the code that you are running is pretty old code. While I can not point at a particular code problem at this point, I would suggest that it might be helpful to upgrade to more recent code in which there are many bug fixes as compared to the code version that you are running.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide