Pix501 and PXE

Unanswered Question
Dec 10th, 2007
User Badges:

How can i configure a Pix501 for PXE so that computers in the network can use pxe boot?


I have a pix501 that is configured as a dhcp server. And a pxe server that is located at another site. There is a tunnel tunnel between the sites.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tstanik Mon, 12/17/2007 - 12:50
User Badges:
  • Bronze, 100 points or more

If the PXE server is broadcasts the reply to the client this means that broadcast through the pix is not allowed. Check if the access list has all necessary ports open for pxe. Also check if dhcp relay is configured on pix or not.

djeronimo Thu, 12/20/2007 - 10:39
User Badges:

I'm in the same boat. i have an ASA 5505 at a remote site configured for DHCP and a 5520 at the local branch with a site-to-site tunnel establish and I would like the remote machines to boot to pxe that is locate on at the local site.

Actions

This Discussion