Jon Marshall Mon, 12/10/2007 - 10:57
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


Not sure what you mean exactly by BIOS but on the 6500 run the following command


"sh module"


Output from one of your 6500's. Note FWSM is in slot 7


=============================================


SZ-JFH-F00-DTE1#sh mod

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

3 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAL0728G7ZE

5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD083703U6

6 4 CSM with SSL WS-X6066-SLB-S-K9 SAD083100RY

7 6 Firewall Module WS-SVC-FWM-1 SAD085008T7

8 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAD073803J8

9 1 Application Control Engine Module ACE10-6500-K9 SAD11300050


Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

3 000d.29fe.5f70 to 000d.29fe.5f7f 5.5 6.3(1) 8.5(0.46)RFW Ok

5 0011.21a1.2cfc to 0011.21a1.2cff 3.1 8.1(3) 12.2(18)SXF6 Ok

6 0012.0060.5d50 to 0012.0060.5d57 1.1 2.1(4) Ok

7 0003.3235.a340 to 0003.3235.a347 3.0 7.2(1) 2.3(2) Ok

8 000d.65ea.1310 to 000d.65ea.133f 5.0 7.2(1) 8.5(0.46)RFW Ok

9 001c.5843.f0fc to 001c.5843.f103 1.6 8.6(0.252-En 3.0(0)A1(3b) Ok


Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------


=============================================


so for example our FWSM software version is 2.3(2)


HTH


Jon

Actions

This Discussion