×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Tandberg multipoint with CCM and Gatekeeper

Unanswered Question
Dec 11th, 2007
User Badges:

We are having issues using the inbuilt Multipoint codec on the Tandberg 880mxp units. all tandbergs register to 2 Gatekeepers (12.4.4 T2) with a CCM doing all the call control and BW as well.

They do not want to use and external MCU

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rhugo Wed, 12/12/2007 - 09:48
User Badges:
  • Bronze, 100 points or more

What version of CallManager, SR, and OS are you running?

What is your gatekeeper platform?

What version of SW are you running on your Tandberg endpoints? Latest and greatest?

david.swash Thu, 12/20/2007 - 01:38
User Badges:

Version of callManager is 4.1

Gatekeeper Platform is 2800 Software (C2800NM-IPVOICE_IVS-M), Version 12.4(4)T2

Tandberg Release is F5.3 on the 880 MXP (not the latest or greatest)



david.swash Thu, 12/20/2007 - 01:43
User Badges:

Have attached Gatekeeper Config logs from gatekeeper of 3rd call failing and also with calls proceeding with 3rd call failing on the end



Actions

This Discussion