12-11-2007 03:36 AM - edited 03-11-2019 04:42 AM
Hi all,
I am trying to TFTP the running config off a ASA via a tunnel onto my LAN.
Can't remember the command for this. It's ip tftp source-interface Vlan1 on a router.
Can anyone help?
Thanks
12-11-2007 04:41 AM
12-11-2007 05:12 AM
Hi tried that, same issue
Paint-GW# copy running tftp://192.168.150.233
Source filename [running-config]?
Address or name of remote host [192.168.150.233]?
Destination filename [\]? paint-fw
Cryptochecksum: xxx
just times out
12-11-2007 05:31 AM
what happens when you run following in ASA
ping 192.168.150.233
12-11-2007 05:32 AM
fails - but can ping from behind the asa to the subnet.
12-11-2007 05:40 AM
can you post me the nat0 acl, the cryptomap acl and the firewall IP address?
02-19-2008 02:12 PM
Any news on your TFTP via tunnel. I have the same issue.
01-19-2009 02:58 PM
You need to identify to the ASA the Address of the TFTP server to allow it
tftp-server inside X.X.X.X filename
filename being what you want to call the config file
then do this
copy running-config tftp:
Source filename [running-config]?
Address or name of remote host [x.x.x.x]?
Destination filename [myfilename]?
Cryptochecksum: e0656519 1a702cac a9463a51 bb8d23bd
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
189404 bytes copied in 12.140 secs (15783 bytes/sec)
regards
David
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: