guruprasadr Tue, 12/11/2007 - 05:30

HI Veena, [Pls RATE if HELPS]


Here is the sample configuration:

--------------------------------------


interface Multilink1

description *****MULTILINK in Mumbai*****

ip address x.x.x.x

ppp multilink

ppp multilink group 1

!

!

interface Serial0/3/0

description **CIR 1**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!

interface Serial0/3/1

description **CIR 2**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!



interface Multilink1

description *****MULTILINK in Chennai*****

ip address x.x.x.x

ppp multilink

ppp multilink group 1

!

!

interface Serial0/3/0

description **CIR 1**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!

interface Serial0/3/1

description **CIR 2**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!


PLS RATE if HELPS.


Best Regards,


Guru Prasad R

bvsnarayana03 Tue, 12/11/2007 - 06:57

Hi veena,


The 1st of concept of creating multilink is that the physical interfaces to be bundled in to multilink has to terminate on a single router at both ends.


hope that clarifies.


pls rate all helpful posts.

Actions

This Discussion