Multilink on serial interface

veena_kompal · ‎12-11-2007

I am a beginner infact novice in configuring multilink. Can we configure multilink by utilising the serial links terminated on multiple/different routers?

guruprasadr · ‎12-11-2007

HI Veena, [Pls RATE if HELPS]

Here is the sample configuration:

--------------------------------------

interface Multilink1

description *****MULTILINK in Mumbai*****

ip address x.x.x.x

ppp multilink

ppp multilink group 1

!

interface Serial0/3/0

description **CIR 1**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!

interface Serial0/3/1

description **CIR 2**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!

interface Multilink1

description *****MULTILINK in Chennai*****

ip address x.x.x.x

ppp multilink

ppp multilink group 1

!

interface Serial0/3/0

description **CIR 1**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!

interface Serial0/3/1

description **CIR 2**

bandwidth 2048

ip address x.x.x.x

encapsulation ppp

ppp multilink

ppp multilink group 1

!

PLS RATE if HELPS.

Best Regards,

Guru Prasad R

bvsnarayana03 · ‎12-11-2007

Hi veena,

The 1st of concept of creating multilink is that the physical interfaces to be bundled in to multilink has to terminate on a single router at both ends.

hope that clarifies.

pls rate all helpful posts.