Single Public to use in NAT

Answered Question
Dec 11th, 2007

I have a single public IP address that I have assigned to my outside interface and I would like to NAT that IP to an internal server. Could I do this?

interface GigabitEthernet0/0

description Facing the Internet

speed 100

duplex full

nameif outside

security-level 0

ip address public_address

global (outside) 1 public_address

static (inside,outside) public_address internal_address

Correct Answer by acomiskey about 9 years 2 months ago

You got it!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
acomiskey Tue, 12/11/2007 - 07:56

Yes. But one small correction.

static (inside,outside) interface internal_address

Tshi M Tue, 12/11/2007 - 09:03


Since I have more than one interface and the outside interface is named WORLD. See below

nameif ethernet5 QA security 50

nameif ethernet6 WORLD security6

should I use

static (QA,WORLD)interface internal_address


This Discussion