QoS deployment

Unanswered Question
Dec 13th, 2007
User Badges:

I want to define 4 and 5 classes from the PE to CE routers DSCP, but the Service Provide running only 3 Classes and support anly TOS. What can I do for realising 4 or 5 classes for the customer.

Thanks for any hints

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
Aaron Dhiman Thu, 12/13/2007 - 09:40
User Badges:

You'll probably just have to go Three Classes on the WAN Link to the SP. You can keep all your DSCPs and 5 classes until you get to the WAN.

mheusing Thu, 12/13/2007 - 10:56
User Badges:
  • Cisco Employee,

Hi,


Have a look at the "Enterprise QoS Solution Reference Network Design Guide Version 3.3"

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/ccmigration_09186a008049b062.pdf

You will find best practices examples and a discussion of mapping classes to match a SP policy/offering in the section "MPLS VPN QoS Design".


Hope this helps! Please use the rating system.


Regards, Martin

Actions

This Discussion