cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1476
Views
10
Helpful
6
Replies

no ip igmp snooping ? no explicit-tracking

alsayed
Level 1
Level 1

hello!

i dont have this :explicit-tracking

DS2(config-if)#no ip igmp snooping ?

fast-leave Enable IGMP fast leave processing

last-member-query-interval Configure IGMP leave query timeout

mrouter Configure an L2 port as a multicast router port

querier Enable IGMP querier processing

ssm-safe-reporting Enable SSM Safe Reporting

static Configure an L2 port as a member of a group

<cr>

i dont have this :explicit-tracking::: on my 720:s72033-ipservicesk9-mz.122-18.SXE6a.bin

1 Accepted Solution

Accepted Solutions

try the command under the interface.

View solution in original post

6 Replies 6

Edison Ortiz
Hall of Fame
Hall of Fame

Hi Ali,

What's the problem you are trying to address here ?

hello !

i have to disable "no ip igmp snooping explicit-tracking" but i didn't find the "explicit-tracking" i have strange brodcast.

10xs

Try

no ip igmp explicit-tracking instead.

Also, Explicit host tracking is supported only with IGMPv3 hosts. Are you running IGMPv3 in your hosts ?

no

Still no:

(config)#no ip igmp ?

immediate-leave Leave groups immediately without sending last member query, use

for one host network only

limit IGMP limit

snooping Global IGMP Snooping enable for Catalyst Vlans

ssm-map SSM mapping commands

vrf Select VPN Routing/Forwarding in

the is no explicit-tracking

try the command under the interface.

Review Cisco Networking products for a $25 gift card