12-13-2007 01:54 AM - edited 03-05-2019 07:58 PM
hello!
i dont have this :explicit-tracking
DS2(config-if)#no ip igmp snooping ?
fast-leave Enable IGMP fast leave processing
last-member-query-interval Configure IGMP leave query timeout
mrouter Configure an L2 port as a multicast router port
querier Enable IGMP querier processing
ssm-safe-reporting Enable SSM Safe Reporting
static Configure an L2 port as a member of a group
<cr>
i dont have this :explicit-tracking::: on my 720:s72033-ipservicesk9-mz.122-18.SXE6a.bin
Solved! Go to Solution.
12-13-2007 08:53 AM
try the command under the interface.
12-13-2007 06:50 AM
Hi Ali,
What's the problem you are trying to address here ?
12-13-2007 08:08 AM
hello !
i have to disable "no ip igmp snooping explicit-tracking" but i didn't find the "explicit-tracking" i have strange brodcast.
10xs
12-13-2007 08:39 AM
Try
no ip igmp explicit-tracking instead.
Also, Explicit host tracking is supported only with IGMPv3 hosts. Are you running IGMPv3 in your hosts ?
12-13-2007 08:43 AM
no
12-13-2007 08:47 AM
Still no:
(config)#no ip igmp ?
immediate-leave Leave groups immediately without sending last member query, use
for one host network only
limit IGMP limit
snooping Global IGMP Snooping enable for Catalyst Vlans
ssm-map SSM mapping commands
vrf Select VPN Routing/Forwarding in
the is no explicit-tracking
12-13-2007 08:53 AM
try the command under the interface.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: