12-13-2007 01:54 AM - edited 03-05-2019 07:58 PM
hello!
i dont have this :explicit-tracking
DS2(config-if)#no ip igmp snooping ?
fast-leave Enable IGMP fast leave processing
last-member-query-interval Configure IGMP leave query timeout
mrouter Configure an L2 port as a multicast router port
querier Enable IGMP querier processing
ssm-safe-reporting Enable SSM Safe Reporting
static Configure an L2 port as a member of a group
<cr>
i dont have this :explicit-tracking::: on my 720:s72033-ipservicesk9-mz.122-18.SXE6a.bin
Solved! Go to Solution.
12-13-2007 08:53 AM
try the command under the interface.
12-13-2007 06:50 AM
Hi Ali,
What's the problem you are trying to address here ?
12-13-2007 08:08 AM
hello !
i have to disable "no ip igmp snooping explicit-tracking" but i didn't find the "explicit-tracking" i have strange brodcast.
10xs
12-13-2007 08:39 AM
Try
no ip igmp explicit-tracking instead.
Also, Explicit host tracking is supported only with IGMPv3 hosts. Are you running IGMPv3 in your hosts ?
12-13-2007 08:43 AM
no
12-13-2007 08:47 AM
Still no:
(config)#no ip igmp ?
immediate-leave Leave groups immediately without sending last member query, use
for one host network only
limit IGMP limit
snooping Global IGMP Snooping enable for Catalyst Vlans
ssm-map SSM mapping commands
vrf Select VPN Routing/Forwarding in
the is no explicit-tracking
12-13-2007 08:53 AM
try the command under the interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide