cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1471
Views
10
Helpful
6
Replies

no ip igmp snooping ? no explicit-tracking

alsayed
Level 1
Level 1

hello!

i dont have this :explicit-tracking

DS2(config-if)#no ip igmp snooping ?

fast-leave Enable IGMP fast leave processing

last-member-query-interval Configure IGMP leave query timeout

mrouter Configure an L2 port as a multicast router port

querier Enable IGMP querier processing

ssm-safe-reporting Enable SSM Safe Reporting

static Configure an L2 port as a member of a group

<cr>

i dont have this :explicit-tracking::: on my 720:s72033-ipservicesk9-mz.122-18.SXE6a.bin

1 Accepted Solution

Accepted Solutions

try the command under the interface.

View solution in original post

6 Replies 6

Edison Ortiz
Hall of Fame
Hall of Fame

Hi Ali,

What's the problem you are trying to address here ?

hello !

i have to disable "no ip igmp snooping explicit-tracking" but i didn't find the "explicit-tracking" i have strange brodcast.

10xs

Try

no ip igmp explicit-tracking instead.

Also, Explicit host tracking is supported only with IGMPv3 hosts. Are you running IGMPv3 in your hosts ?

no

Still no:

(config)#no ip igmp ?

immediate-leave Leave groups immediately without sending last member query, use

for one host network only

limit IGMP limit

snooping Global IGMP Snooping enable for Catalyst Vlans

ssm-map SSM mapping commands

vrf Select VPN Routing/Forwarding in

the is no explicit-tracking

try the command under the interface.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card