urgent igmp

Unanswered Question

Hello!

i dont have IGNP in my Network.and i want to disable it.i have 720 with this IOS:s72033-ipservicesk9-mz.122-18.SXE6a.bin.I Read this in some link provided by alan:

no ip igmp snooping explicit-tracking

no ipv6 mld snooping explicit-tracking

no ipv6 mld snooping

but in my 720 i dont have this:

DS2(config-if)#no ip igmp snooping ?

fast-leave Enable IGMP fast leave processing

last-member-query-interval Configure IGMP leave query timeout

mrouter Configure an L2 port as a multicast router port

querier Enable IGMP querier processing

ssm-safe-reporting Enable SSM Safe Reporting

static Configure an L2 port as a member of a group

10xs and plz help

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Edison Ortiz Thu, 12/13/2007 - 06:56

Strange,

I have a 720 here and the command works per guidelines:

no ip igmp snooping ?

l2-entry-limit limit on the l2 entry that can be installed by IGMP snooping

limit Configure IGMP Snooping limits

However, I have SXF here, I wonder if SXE did not provide the ability to disable IGMP snooping.

System returned to ROM by power cycle (SP by power on)

System image file is "bootdisk:s72033-ipservicesk9-mz.122-18.SXE6a.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

cisco WS-C6509-E (R7000) processor (revision 1.3) with 458720K/65536K bytes of memory.

Processor board ID SMC1101003A

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

SuperLAT software (copyright 1990 by Meridian Technology Corp).

X.25 software, Version 3.0.0.

Bridging software.

TN3270 Emulation software.

55 Virtual Ethernet/IEEE 802.3 interfaces

194 Gigabit Ethernet/IEEE 802.3 interfaces

4 Ten Gigabit Ethernet/IEEE 802.3 interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

Actions

This Discussion