12-13-2007 02:04 AM - edited 03-05-2019 07:59 PM
Hello!
i dont have IGNP in my Network.and i want to disable it.i have 720 with this IOS:s72033-ipservicesk9-mz.122-18.SXE6a.bin.I Read this in some link provided by alan:
no ip igmp snooping explicit-tracking
no ipv6 mld snooping explicit-tracking
no ipv6 mld snooping
but in my 720 i dont have this:
DS2(config-if)#no ip igmp snooping ?
fast-leave Enable IGMP fast leave processing
last-member-query-interval Configure IGMP leave query timeout
mrouter Configure an L2 port as a multicast router port
querier Enable IGMP querier processing
ssm-safe-reporting Enable SSM Safe Reporting
static Configure an L2 port as a member of a group
10xs and plz help
12-13-2007 06:56 AM
Strange,
I have a 720 here and the command works per guidelines:
no ip igmp snooping ?
l2-entry-limit limit on the l2 entry that can be installed by IGMP snooping
limit Configure IGMP Snooping limits
However, I have SXF here, I wonder if SXE did not provide the ability to disable IGMP snooping.
12-13-2007 08:00 AM
hello edison
i dont have this:explicit-tracking
12-13-2007 08:30 AM
You need to type that command under the intended interface:
http://www.cisco.com/en/US/docs/ios/ipmulti/command/reference/imc_02.html#wp1013416
Can you post the output from typing show version from the switch ?
12-13-2007 08:35 AM
System returned to ROM by power cycle (SP by power on)
System image file is "bootdisk:s72033-ipservicesk9-mz.122-18.SXE6a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco WS-C6509-E (R7000) processor (revision 1.3) with 458720K/65536K bytes of memory.
Processor board ID SMC1101003A
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
55 Virtual Ethernet/IEEE 802.3 interfaces
194 Gigabit Ethernet/IEEE 802.3 interfaces
4 Ten Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
12-13-2007 08:41 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: