Solved: icmp used for keep alive

etxnreg · ‎12-13-2007

Hi,

We have a 3ppp product that is connected to our IOS_XR router.

This 3ppp node use icmp with ttl=1 to check the inverness.

If the node send more then 100 icmp/s the router stop to answer.

is it possible with command to set how many icmp message/s should be allowed?

BR Niklas

didyap · ‎12-20-2007

The drops you are getting are related to LPTS policer violations. These are normal and in place to restrict packet processing on LC/RP CPUs. The workaround will be to reduce the size of ICMP packet that the 3ppp node sends to the router.

View solution in original post

didyap · ‎12-20-2007

The drops you are getting are related to LPTS policer violations. These are normal and in place to restrict packet processing on LC/RP CPUs. The workaround will be to reduce the size of ICMP packet that the 3ppp node sends to the router.