7200 (7206) Chassis Serial Number

Unanswered Question
Dec 13th, 2007
User Badges:

All,

How do you pull a chassis serial number from the CLI? I thought 7200s used an RSP and that you were able to pull the chassis serial number using the 'show rsp chassis-info'


thanks in advance.

GH

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
paolo bevilacqua Fri, 12/14/2007 - 16:41
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


No, the 7200 uses NPE and not RSP, there is no way to read chassis S/N by software commands.


Hope this helps, please rate post if it does!

balajitvk Sat, 12/15/2007 - 02:35
User Badges:
  • Silver, 250 points or more

Hi,


Just try show inventory command, it will show the chasis serial no.


Rate if it does,

Rgs.


Richard Burts Sat, 12/15/2007 - 10:46
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

I have had success in getting the chassis serial number using the show inventory command only on ISR routers. I have tried the show inventory command on several different 7206 (with a couple different versions of IOS) and I have NEVER had it give me a number that matches what is on the label on the chassis. The output shows a number which is supposed to be the chassis serial number. But on 7206 it has not been the number that appears on the chassis label.


As far as I know the only reliable way to get the chassis serial number of 7206 is visual inspection of the chassis.


HTH


Rick

Actions

This Discussion