12-14-2007 02:11 AM - edited 02-21-2020 01:49 AM
Dear guys
i have an PIX 515e with 8.0 version and in the other side a 2811 router, the site to site vpn between these two device is established, but i want some remote client can connect to pix ,
so is this possibe two implement site to site and remote access vpn on one pix interface (outside) ??
any hint?
Solved! Go to Solution.
12-14-2007 03:08 AM
Hi
Yes, this is perfectly possible. Please see attached configuration example. Note it is for pix v7.x but it should work fine for 8.x
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml
HTH
Jon
12-14-2007 03:08 AM
Hi
Yes, this is perfectly possible. Please see attached configuration example. Note it is for pix v7.x but it should work fine for 8.x
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml
HTH
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: