cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
760
Views
0
Helpful
1
Replies

Qos on a atm interface

Ilir Mitrushi
Level 1
Level 1

We have a 2811 providing internet connectivity through a adsl line and I am trying to implement qos in order to improve bandwidth usage and prioritize traffic. I suppose the best place to implement qos would be the wan interface on the output direction. The wan interface is an atm interface configured in bridge mode with a bvi which in turn is configured with a static public IP. The bvi doesn't support CBWFQ and I have tried to implement it on the pvc of the atm interface which is supposed to support it. I don't get a error message when implementing the service-policiy command but nothing happens and the command doesn't show on the configuration. Do PVCs without an ip address support CBWFQ? If not what is the best approach in my case? As I mentioned my goal is to optimize the use of our internet connection.

Thank you very much for your help

Ilir M

1 Reply 1

dodgerfan78
Level 1
Level 1

Here is a link with some good information:

http://www.cisco.com/warp/public/121/where_policy.html

Hope it helps.

-B

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco