Cable for PA-MC-8TE1+= port adapter

Unanswered Question
Dec 16th, 2007
User Badges:

Hi Sir,


For PA-MC-8TE1+= port adapter, can anyone confirm the correct cable is CAB-E1-RJ45BNC= (description: E1 Cable RJ45 to dual BNC (unbalanced), Spare)?



Thank you.


B.Rgds,

Lim TS


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Sun, 12/16/2007 - 06:07
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

If you are going to a 75 Ohm circuit using BNC, yes.


Hope this helps, please rate post if it does!

Danilo Dy Sun, 12/16/2007 - 06:09
User Badges:
  • Blue, 1500 points or more

Hi,


The PA-MC-8TE1+ port adapter uses shielded twisted-pair cables with RJ-48C connectors to connect to a PBX or to the Public Switched Telephone Network (PSTN).


Refer to http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/8-port_multichannel_t1.ei_8pri_install_config/2738ins.html#wp1031384


Regards,

Dandy

Actions

This Discussion