6509 interface traffic - network latency

Unanswered Question
Dec 17th, 2007
User Badges:


Recently I had to trouble shoot 6509 switch, high network latency issue. To my surprise I realized that there is no command (at leat to my knowledge) to check what is the traffic coming in and going out (show mac is giving some octect based output) ... is there any equvilent command for show interface in cisco 6509 switch. Objective is to view the traffic utilization

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
akachroo123 Mon, 12/17/2007 - 03:51
User Badges:


Try using this command.It will provide u the detail of protocol,Pkts In,Chars In and Pkts out,Chars Out on all the Vlans and the interfaces.

Switch#show interfaces accounting


prasad.gsmc Mon, 12/17/2007 - 03:57
User Badges:

my switch is on cat os and dosent have the optiong

6509-Switch> (enable) show interface ?

MUHAMMAD SHAHEEN Mon, 12/17/2007 - 04:19
User Badges:
  • Silver, 250 points or more

Hi Parsad,

try using show counters module/port

for example

Switch1> show counters 7/24

or you can also use

Switch> show counters 7

and it will list counters for all the ports on module 7




This Discussion