12-17-2007 03:22 AM - edited 03-05-2019 08:01 PM
Hi,
Recently I had to trouble shoot 6509 switch, high network latency issue. To my surprise I realized that there is no command (at leat to my knowledge) to check what is the traffic coming in and going out (show mac is giving some octect based output) ... is there any equvilent command for show interface in cisco 6509 switch. Objective is to view the traffic utilization
12-17-2007 03:51 AM
Hi,
Try using this command.It will provide u the detail of protocol,Pkts In,Chars In and Pkts out,Chars Out on all the Vlans and the interfaces.
Switch#show interfaces accounting
AK
12-17-2007 03:57 AM
my switch is on cat os and dosent have the optiong
6509-Switch> (enable) show interface ?
12-17-2007 04:19 AM
Hi Parsad,
try using show counters module/port
for example
Switch1> show counters 7/24
or you can also use
Switch> show counters 7
and it will list counters for all the ports on module 7
HTH
Shaheen
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: