3750 Stack Reloads

c-wilkins · ‎12-17-2007

Does anyone know of any known issues in which a single switch in a stack is reloaded but additional switches will restart as well? For example, in a 5 switch stack, switch 3 is reloaded. Switch 1 and 2 reload as well.

carenas123 · ‎12-25-2007

The only way to determine this is to look at the logs or state of the switch just

before a reload. This can be achieved by setting up a logging server at a remote location

and let it record all the logs from the switch. When the switch reloads the information is

removed so we really cannot do much with the switch after a reload.

c-wilkins · ‎12-26-2007

We do have all of our switches pointed to a logging server and have checked the logs prior to doing this. There is never any logs that point to something wrong with the switch prior to it restarting.

glen.grant · ‎12-25-2007

Did you just reload switch 1 ? If you just do a normal reload command I believe it will reload the whole stack if you don't specify which switch to reload .

c-wilkins · ‎12-26-2007

No, we used the reload slot 4 for example to reload switch 4. When we do this, some additional switches reload in the stack as well, and some in the stack do not reload.

pornthip_k · ‎05-13-2008

Dear Sir,

I got the problem like you.

If you already resolve this problem,, Could you please tell me how to make this point disappear?

Thank you,

Natchamon