12-17-2007 11:06 PM - edited 03-05-2019 08:03 PM
We configured the VLANs in 3750, 2960 Switches.The problem is that out of 150 users only 7-10 users are not getting ip addresses through DHCP as well as statically. 90 % users of one switch are properly getting the network but few users on same switch are not able to get the network.pls help us.
12-18-2007 02:20 AM
Hi Parba,
There is several things to verify.
1. check the VLAN on switch interfaces for your users, that can't be reached
2. check if that VLAN is in the trunk towards your rotuer
3. if your DHCP server is not on the same VLAN as your guests, verify ip helper address poiting to your DHCP server
On your switch:
do sh vlan to see, if the vlan is created
do sh interface status to see, if the correct VLAN is assigned to correct interfaces
do sh run int XY - the interface, where your users are connected (the problematic one)
If possible, post the outputs
HTH
Regards
Ivan
[rate any helpful posts]
12-18-2007 04:38 AM
Also make sure portfast is turned on for all user ports.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide