12-17-2007 11:31 PM - edited 03-05-2019 08:03 PM
Hi guys,
I would like to know how to see traffic flow stats on CatOS?
As compared to IOS's sh int, which we can get all the traffic stats such as below:
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 109 multicast, 0 pause input
0 input packets with dribble condition detected
8302 packets output, 869504 bytes, 0 underruns
0 output errors, 182 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Really appreaciate your contributions
Thanks :-)
12-17-2007 11:41 PM
Hi
sh port "port number" will give you most of the above in regards to errors/collisions etc. but it doesn't give you the amount of traffic.
sh counters "port number" willl give you all those gory details :)
Jon
12-18-2007 04:39 AM
Also "show counters slot/port will give you the same type stats.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide