LMS 3.0 December upgrade - portal issue

Unanswered Question
Dec 18th, 2007
User Badges:

Hi,

Yesterday I deployed the December upgrade for LMS 3.0 (along with HUM) and the portal is no longer showing the RME portlet in the Functional section (this section cannot be customized). Anyone else had similar issue?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Tue, 12/18/2007 - 23:27
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Try re-registering RME under Common Services > Server > Homepage Admin > Application Registration.

dmitry Wed, 12/19/2007 - 07:41
User Badges:

Thanks, it did the trick. If you do not mind, here is another question about another (known bug) issue with the Dec update: the snmpwalk no longer works (in Device Centre Tools section). I'm able to do it from the OS itself to any devices managed by CW.

I did install NetSNMP, GCC346, openssl 0.9.8 from SunFreeware for Sol 10 (/usr/local). The lib file was modified:

Configuration file [version 4]: /var/ld/ld.config

Default Library Path (ELF): /lib:/usr/lib (system default)

Trusted Directories (ELF): /lib/secure:/usr/lib/secure:/usr/local/lib:/usr/local/ssl/lib


However I was not sure if CW uses ld.config

Also, does it (CW) need to have access to the /usr/local/bin for snmpwalk binary


Thanks

Joe Clarke Wed, 12/19/2007 - 09:36
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Please start a new thread for this issue.

Actions

This Discussion