Problem with communication between analog phones and IP Phone

Unanswered Question
Dec 19th, 2007
User Badges:

Hi all,

I have a CCM 4.1.3 and a Cisco router 2821 as a voice gateway with an EVM-HD-8FXS/DID module which has an EM-HDA-6FXO card; My problem is that when I call the analog phone (8800) connected to the FXS port from an IP Phone (4745) the analog phone rings; but When I call the IP phone from the analog phone, the call doesn't go through.

Please can someone help me?

See my configuration:

voice-port 2/0/0

description Connected to 4800

dial-peer voice 4000 voip

preference 1

destination-pattern 4...

voice-class codec 1

session target ipv4:

dtmf-relay h245-alphanumeric

!dial-peer voice 4800 pots

preference 1

destination-pattern 8800

port 2/0/1


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Wed, 12/19/2007 - 10:08
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


try removing voice-class and use "codec g711u" instead under DP 4000.

Hope this helps, please rate post if it does!


This Discussion