Add a vlan with wpa-psk using CLI

Unanswered Question
Dec 19th, 2007
User Badges:

Hello,


I must configure a Cisco Aironet 1100 :

Here is the first configuration : no vlan with 128 key WEP. I keep this configuration in wep (no associated with a vlan) for the moment.

Now I have to create a vlan associated with wpa-psk with simple config (no server manager, no radius, no eap).

For example to declare this configuration, I think to use these CLI :.

ap(config) interface Dot11Radio0.2

ap(config-subif) encapsulation dot1Q 2

ap(config-subif) bridge-group 2

ap(config-subif) exit

ap# copy running-config startup-config


AP(config)#interface dot11Radio 0.2

AP(config-if)#encryption mode ciphers tkip

AP(config-if)#ssid xxxx


AP(config-if-ssid)#authentication key-management wpa

AP(config-if-ssid)#wpa-psk ascii xxxx


Do you think that these CLI are sufficient and

have you to modify the other peripherals networks (router...).

Now with wep and no-vlan you can connect on network.

Thank you for your help.


Eddy


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion