cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
464
Views
0
Helpful
5
Replies

TDM Switching AS54

kirill1980
Level 1
Level 1

AS5400XM work as ISDN PRI - ISDN PRI switch using IVR. But both side not hear ringback tone during a call. How can solve this issue?

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Please see following document:

http://cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml

Hope this helps, please rate post if it does!

When I made a call without IVR just use two-stage dialing ringback tone is heard. The same call application is run on AS53 and there is not posted problem.

Then is responsibility of the IVR script to propagate alerting status from one call leg to anther. Specifically on receiving ev_alert it should execute leg alert.

The same IVR script work in AS5300 and AS5350 and there are no problem with ringback tone in these gateways. Note that sometimes ringback tone appear after about one minute of a call in AS5400.

Perhaps the other devices are running a different IOS with a slightly different ISDN state machine and TCL/IVR interaction, or simply there is a bug in the IOS running on the 5400XM.

You should look at a comparative isdn trace to know.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: