ASA 5510 Add 2nd ISP

halspuppet · ‎12-20-2007

On my ASA 5510 we currently have a single "outside" connection to the Internet. I would like to add an additional connection using the interface ethernet 0/2 using a DSL line already installed in the office. Is it possible to route all http traffic through eth 0/2? I am very concerned about not affecting a site to site VPN or inbound/outbound email that is using the current "outside" connection.

Thank you for helping.

hp.

Richard Burts · ‎12-21-2007

As far as I know the ability to route traffic based on traffic type is what we generally identify as Policy Based Routing. I believe that PBR is an IOS functionality but is not implemented on the ASA.

HTH

Rick

HTH

Rick