Monitoring the serial link

Unanswered Question
Dec 20th, 2007
User Badges:

hi,

We have 8 MB serial link for internet access given by ISP. We need to check if we are getting really 8 MB from service provider. And secondly what type of traffic is passing through that serial link. (like http,ftp, or any other wellknow ports used by applications ) . Are there any commands to see these details.

Any link on cisco.com ?

Thanks in advance

Subodh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bapatsubodh Fri, 12/21/2007 - 03:21
User Badges:

hi,

we have given access only to particular ip addrsss only. But somehow all bandwidth is getting choked . That is why we need to check which ports are utilizing the bandwidth.

Subodh

Richard Burts Fri, 12/21/2007 - 05:47
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Subodh


I believe that you can get helpful information about this from NetFlow. This link will give helpful information about configuring NetFlow and how to use it to identify the Top Talkers:

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805e11ab.html


HTH


Rick

Actions

This Discussion