cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
801
Views
0
Helpful
18
Replies

CME 4.2 call park issue

atomike10
Level 1
Level 1

When a user puts a call on park, goes to another phone, picks the park up via speaker phone, we get one way communication. The Person that is parked can hear the person, but the person who picked up the park cannot hear the person who was parked. Any ideas?

Thanks,

18 Replies 18

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi,

Which exact router and IOS image are you using ?

2851 router with 12.4(11)XW2, thanks...

DN Configs:

ephone-dn 52

number 30700

park-slot timeout 90 limit 15

description 30700 park DN

!

!

ephone-dn 53

number 30701

park-slot timeout 90 limit 15

description 30701 park DN

!

!

ephone-dn 54

number 30702

park-slot timeout 90 limit 15

description 30702 park DN

!

!

ephone-dn 55

number 30703

park-slot timeout 90 limit 15

description 30703 park DN

!

!

ephone-dn 56

number 30704

park-slot timeout 90 limit 15

description 30704 park DN

Hi, can you upgrade to 12.4(11)XW5 and try again ? Also need to check phone model and firmware used.

Is this a known issue with XW2?

thanks,

Hi, the XW buglist is of such an impressive size (check release notes) that unless you are running latest IOS and phone FW, you cannot receive TAC assistance if needed.

As workaround, have you tried answering with the headphone button and then press speakerphone (I assume pulling handset is not an option).

I have asked my customer to try with the handset, have not received a reply yet.

telephony-service

load 7914 S00104000100

load 7941 SCCP41.8-2-2SR2S

load 7961 SCCP41.8-2-2SR2S

load 7936 cmterm_7936.3-3-13-0

load 7911 SCCP11.8-2-2SR2S

41's, 61's were used for the test.

Hi, unrelated to the issue, cisco recommends S00105000200 for the 7914.

Will I stay with those phone loads with the new code? I cannot find any newer FW than that.

Thanks,

There is newer code - 8.3.x but you have already what cisco recommends:

http://cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme42spc.htm

so I wouldn't change that.

I upgraded to the 12.4(11)XW5 and this is still an issue. It works when you pick the handset up, just not with the speaker phone.

At this point your only choice is to work with the TAC to have this worked as a bug.

Be prepared to provide abundant "proof" of the problem, persistent to insist that a new bug is filed (ie that is NOT working as designed, nor documented anywhere that speakerphone cannot be used), and patient enough waiting a fix to be made available to you. Unfortunately the full process can take months.

I upgraded to the 12.4(11)XW5 and this is still an issue. It works when you pick the handset up, just not with the speaker phone.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: