12-22-2007 01:24 PM - edited 03-15-2019 07:55 AM
How do I make a 7960 show two dual lines for one extension?
for example, extension 201 appears on 2 buttons where there is only one voice mail box that could be accessed using either buttons? thanks all
Mohamed
12-23-2007 06:46 AM
Hi Mohamed,
Here is the method for doing this in CCM;
Configuring a Single Dialed Number on Multiple Lines
From this excellent Tech Note;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009409c.shtml
Hope this helps!
Rob
12-24-2007 10:56 AM
Thanks for the response. I am sorry, i didn't really mention that the issue is on UC500 that is running call manager express and unity express. I'd appreciate any ideas. thanks all
Mohamed
07-31-2008 09:40 AM
test
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide