my asa5520 no informaintion for console,asa5520 power-on is startup.

Unanswered Question
Dec 22nd, 2007

since do command "delete disk0:"and "copy tftp flash:xxx.bin",asa5520 restart is abnormality and console port doesnot output. please help me.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
smahbub Fri, 12/28/2007 - 12:39

Complete these steps in order to use the console port to connect the modem:

If a PC is used to configure the modem, use hyper terminal with the speed set for 9600 baud.

Use this init string in order to initialize the modem:


An OK from the modem appears.

Enter this init string also in order to disable Echo and result codes:


Change the modem dip switches to 4 and 8 down and power cycle the modem.

Remove the cable from the PC and connect it to console port.

No configuration is required on the console.

Note: Use the standard Cisco Rolled Cable along with the modem adapter.


This Discussion